Welcome to the NO TECH HOVERBOARD PAGE!
It's 2015 and yes you CAN HAVE YOUR HOVERBOARD!!
All the board parts have been remastered in 2015, all the graphics COMPLETELY re-drawn. All boards are now scale to the proper dimensions.
Showing below is the NO TECH kit displaying the thermal formed clamps/pads version.
NEW!!! If you're on a budget and in need of separate parts, these are THERMAL FORMED versions of the clamps/magnets. They are $28.00 plus shipping
2013 LIFESIZED HOVERBOARDS!!!
Individual parts list (kit parts):
Clamps and Hoverdisks (full set - 2 parts) THERMAL FORMED VERSION: $28.00
Clamps and Hoverdisks (full set - 2 parts): RESIN CASTINGS $59.95
Battery: $14.95 (resin cast)
Circular footpad (resin cast) $13.95
2 Sideclamps (needed for ALL the boards except marty) $29.95 set of 2
Pitbull Rockets:(set of two SOLID cast HIGH IMPACT plastic injected) $85.00
Pitbull Crossbrace and separation brick: (laser cut ABS for strength) $24
Pitbull Detail set:
Front horn: (laser cut ABS for strength! includes dome knob) $18.95
Y-Panel: $19.95 (add circular footpad for $13.95 extra)
Underside Detail panel (2 parts): $22.95
Hook-on Clamps (6 parts). $12.95
The decals are professionally printed on state of the art equipment. Each decal is DIE-CUT, that is, there is no trimming necessary. Where necessary (especially the odd-man-out deck), they are adhered to translucent wax paper. Spray your deck down with windex, slide your graphic in place (it will slide around for a few minutes), squeegee out any airbubbles and let dry for a few hours.
PITBULL DECAL: $24.95 (one laser cut piece, no trimming necessary)
NO TECH: $69.95 top and bottom no trimming necessary
RISING SUN $69.05 top and bottom
ODD MAN OUT: $69.95 (set of separate decals)
MARTY DECAL: $74.95 top and bottom, plus side strips, no assembly necessary)
You can cut your own decks out of foam, or you can order CNC-cut MDF decks. The decks come to you straight off the CNC machine with flat edges, or you can order them pre-routed with the proper beveled and shaped edges. Prices:
PITBULL DECK: $65 (unshaped edges) $85 shaped edges
NO TECH DECK: $69 (un- beveled edges) $75 hand-beveled edges
RISNG SUN DECK: $69 (un- beveled edges) $75 hand beveled-edges
ODD MAN OUT DECK :$60 (un- beveled edges) $70 hand beveled edges
MARTY DECK: $60 (unassembled, unbeveled) $70( beveled unassembled), $75 (assembled, beveled)
FULL KITS: (all parts are untrimmed, unpainted, unassembled)
This is a list of FULL KITS that include all the kit parts needed for each hoverboard:
NO TECH: Discounted to $225 (all resin parts, decal set, MDF deck with beveled edges)
RISING SUN: Discounted to $225 (all resin parts, decal set, MDF deck with beveled edges)
ODD MAN OUT: Discounted to $175 (all resin parts, decal set, MDF deck)
PITBULL: $385.00 (this is the WHOLE SHEBANG!) Resin castings (all components including laser cut ABS & 2 rockets), Decal set, MDF deck with shaped edges.
MARTY HOVERBOARD: $195 (UNASSEMBLED, UNBEVELED deck, all resin parts, all decal components) $225 (ASSEMBLED BEVELED DECK, all resin parts, all decal components)
**To finish the detailing on the PITBULL, you'll need grip surface sheet (made for skateboards), 2" black nylon webbing, and you'll need perferated steel sheets to detail the rocket connections. These materials can be found at any hardware store.
1:6 Scale Hoverboards.
If the fullscale hoverboards are out of your budget, perhaps you'd love these 1:6 scale hoverboards: The kits are very easy to assemble and paint.
Each kit comes with a resin deck (cast from a laser cut acrylic deck), decal set as needed, and resin cast detail components.
**prices coming soon!! (estimated to be about $19.00 for the no tech, rising sun, odd man out and marty and $25 for the pitbull beause of the various details involved).
Visit all the other HOVERBOARDS AND THE 2015 SODA BOTTLES TOO!!
RISING SUN HOVERBOARD
NO TECH HOVERBOARD
ODD MAN OUT HOVERBOARD
1/6 SCALED HOVERBOARDS