MARTY HOVERBOARD
Welcome to the MARTY HOVERBOARD PAGE!
**prices updated 2023. Please email first, some paypal buttons are not updated yet.
The Marty hoverboard kit under-went a re-think in 2023 which culminated in NEW PARTS that will be included free in each kit.
New parts include fabric footpad covers (2 colors), 2 vinyl hoverpad covers, fuzzy foot strap =)
All the board parts have been remastered in 2013, all the graphics COMPLETELY re-drawn. All boards are now scale to the proper dims. Wait till you see this!!!
2013 LIFESIZED HOVERBOARDS!!!
Individual parts list (kit parts):
Clamps and Hoverdisks (full set - 2 parts): RESIN CASTINGS $69.95
Battery: $14.95 (resin cast)
Circular footpad (resin cast) $13.95
2 Sideclamps (needed for ALL the boards except marty) $29.95 set of 2
Pitbull Rockets:(set of two SOLID cast HIGH IMPACT plastic injected) $85.00
Pitbull Crossbrace and separation brick: (laser cut ABS for strength) $24
Pitbull Detail set:
Front horn: (laser cut ABS for strength!) $18.95
Y-Panel: $19.95 (add circular footpad for $13.95 extra)
Underside Detail panel (2 parts): $22.95
Hook-on Clamps (6 parts). $12.95
DECALS:
The decals are professionally printed on state of the art equipment. Each decal is DIE-CUT, that is, there is no trimming necessary. Where necessary (especially the odd-man-out deck), they are adhered to translucent wax paper. Spray your deck down with windex, slide your graphic in place (it will slide around for a few minutes), squeegee out any airbubbles and let dry for a few hours.
PITBULL DECAL: $24.95 (one laser cut piece, no trimming necessary)
NO TECH: $69.95 top and bottom no trimming necessary
RISING SUN $69.05 top and bottom
ODD MAN OUT: $69.95 (set of separate decals)
MARTY DECAL: $74.95 top and bottom, plus side strips, no assembly necessary)
Note:
**To finish the detailing on the PITBULL, you'll need grip surface sheet (made for skateboards), 2" black nylon webbing, and you'll need perferated steel sheets to detail the rocket connections. These materials can be found at any hardware store.
Here's a closer look at the pitbull resin cast parts set. Really amazingly clean details here! Parts were meticulously made one at a time and hand-cast.
A look at how the clamps insert into the battery brick on each side. It makes for a really professional look and it's easier to paint the separate colors!!
And here's a look at the how the parts go on the deck:
Visit all the other HOVERBOARDS AND THE 2015 SODA BOTTLES TOO!!
RISING SUN HOVERBOARD
NO TECH HOVERBOARD
ODD MAN OUT HOVERBOARD
PITTBULL HOVERBOARD
1/6 SCALED HOVERBOARDS
COMING SOON!!
EMAIL IMPERVIUM@HOTMAIL.COM