NABOO J-TYPE STAR SKIFF

WELCOME TO THE STAR SKIFF WEBPAGE!!!  Pre-orders for this model are open until Dec 25th 2025.  Pre-orders receive both the landed configuration and the flight configuration for a discounted price.  After pre-order has expired,the landed configuration will be an extra cost add-on.  This model is fully available RIGHT NOW in flight configuration.    You can also follow this project on my FB PAGE. 

Parts are in STL format and can be printed on FDM or resin printers.   Parts are separated so you can print a very large model on a modestly-sized printer. The model at default scale is 24" wingspan tip to tip.  This translates to 1:96th scale.  We separated the parts to allow you to print the largest parts on an elegoo jupiter without splitting them up. You can upscale this model to any size you want in your slicing software.  

NABOO STAR SKIFF DIGITAL STL FILES (no physical media)

NABOO STAR SKIFF DIGITAL STL FILES (no physical media) $35.00 USD

Once ordered, the parts are sent manually. Please allow 2-3 hours (during business hours) to receive your files after ordering. Thank you!

This is modeled with a separate interior cockpit module (allowing you to install LEDs) and considerations for LED interior wire channels/battery storage with a magnetic coverplate, etc... AND YES A LANDED VERSION IS INCUDED AS AN OPTION!! There are 2 versions: 1.) LANDED 2.) FLIGHT MODE. We're currently engineering separations/pinning. The few parts I've test printed look incredible. It took a few tries but we nailed a satisfactory panel line depth/width. It's a tricky affair because if the scribed lines are too large you lose the scale of the thing, if they're too small they disappear in printing. We exaggerated the width and depth by a tad bit because I'll be doing a video seminar of proper home chrome plating and the process adds a certain level of thickness (3 layers of 2k automotive paint) and that has a tendency to diminish panel lines. I'll be coordinating with 8K miniatures for printing a large version and filming a chroming tutorial video instruction for this. This will be printable either in FDM or resin.

 

FLIGHT CONFIGURATION STL PARTS INCLUDE:

1. FRONT FUSILAGE
2. REAR FUSILAGE (2 versions, one has a removeable 9v battery hatch)
3. INTERIOR CABIN
4. 2 CABIN CHAIRS
5. LEFT WING
6. RIGHT RIGHT
7. WING SPOILERS AND GREEBLIES (4 PARTS)
8. LEFT ENGINE (3 PARTS)
9. RIGHT ENGINE (3 PARTS)
10. PDF ASSEMBLY ILLUSTRATIONS FOR FLIGHT VERSION
11. PDF ASSEMBLY ILLUSTRATIONS FOR LANDED VERSION

LANDED CONFIGURATION VERSION INCLUDES:

 Same parts listed above and

1. alternate rear fusilage/hull that accomodates 3 detailed landing bays. 
2. left landing gear assembly
3. right landing gear assemble
4. front landing gear assembly
5. flaps set for left, right, and front
6. rear ramp
7. ramp interior compartment

 

Some key features of this model include optional onboard 9v battery storage with removable hatch, wiring channels, detailed separated interior canopy and cargo hold, landing gear options, keyed parts and allowance for metal rod pins to increase rigidity to prevent warping. 

KEEP CHECKING BACK - MORE TO COME!

RETURN TO 3D MODELS PAGE