OBLIVION DRONE MODEL KIT

Welcome to the OBLIVION DRONE MODEL page!! This was a tremendous film with incredible designs. I decided to produce a replica of the DRONE DEFENDER.  The model measures 11" long and was sculpted as a 3D mesh, then 3D printed with several scratch made pieces.  It's a wonderful blend of old school and new school modeling tech.

 

LIGHTING KIT is now available for this kit.  Look at this wonderful buildup by Randy Neubert at VOODFX.COM.  He went above and beyond and even has lighting FX on the base!

 

OBIVION DRONE model kit

Oblivio Drone model $225.00 USD Add the Laser cut base (with clear rod) $25.00 USD Specify Clear nozzles (3) (instead of regular resin) $0.00 USD U.S. shipping $16.00 USD Overseas shipping $38.00 USD

   

**free of charge you can ask for clear cast engine nozzles and engine bell if you are planning on adding lighting FX features.  Light kit is available at VOODOOFX.COM

MODEL KIT PRICING:

KIT is untrimmed, unassembled and unpainted  $225.00

The kit include: 

1. The main body (hollow cast to allow for internal electronics)
2. 4 guns (pressure cast for AMAZING DETAIL!)
   
3. Left and Right upper engine nozzles
4. power core detail
5. Main engine bell
6. 6 brass probes
7. 2 small lenses
8. 1 main eye lens
9. Main eye disk
10. Waterslide decals
11. Instructions
    

Shipping in the U.S. is $16.00.  Overseas shipping $35

You can add the laser cut base top panel and clear rod for $25.00 (styrene only you provide your own MDF)

OBIVION DRONE model kit

Oblivio Drone model $225.00 USD Add the Laser cut base (with clear rod) $25.00 USD Specify Clear nozzles (3) (instead of regular resin) $0.00 USD U.S. shipping $16.00 USD Overseas shipping $38.00 USD

 BELOW is a shot of the model kit base.  This is laser cut in .080 plastic and can be lit from underneath in a show-box style base for lighting effects. (see pics below)

 

__________________________________________________________

THE VOODFX BUILDUP BY RANDY NEUBERT:

HOW IT WAS MADE:

The Drone print has finally returned from the printers! It is so amazing!

When someone thinks of 3D-PRINTED.  They believe that the project is finished (besides painting) once it comes off the printer.  Not true.  Especially in the case of this project.  The 3D print was only the start.  In order to produce fresh castings the model needed to be cleaned and segmented.   Instead of a one-piece model, I decided to chop the model up into over a dozen parts. The more parts, the better the detail!   Each piece needed to be harvested using traditional molding techniques. Then each piece needed to be adapted for traditional molding technology (using clays, rubber, fiberglass, etc..). This was a ton of work!  2 years worth.

 

Modeling for the interior fo the gunpods (SUPER DELUXE version)

___________________________________

Here's something interesting!!  In my research I found a deleted scene showing what appears to be a headless Tom Cruise holding his gun roughly painted on drone 166.  I always thought those markings were dirt smudges but it turns out it's actually menacing graffiti!

The waterslide decal set includes this small detail.

For more information contact: impervium@hotmail.com

 

 Model mesh in progress!!

 

FINAL MODEL BEFORE 3D PRINTING.

 VECTOR DESIGNING THE INTERIOR OF THE GUNPODS FOR THE SUPER DELUXE VERSION:

Special thanks to JERRIS HOF and DANNY LANCELOT for assisting with the 3D Model mesh corrections.    Brad Burrows and Randy Neubert of voodoofx.com  THANK YOU!

RETURN TO MODELS PAGE!! 

 VISIT THE INFINITY ORB!!