Odd man Out back to the future hoverboard
Welcome to the ODD MAN OUT HOVERBOARD PAGE!
It's 2013 and yes you CAN HAVE YOUR HOVERBOARD!!
All the board parts have been remastered in 2013, all the graphics COMPLETELY re-drawn. All boards are now scale to the proper dimensions.
If you're on a tighter budget and in need of separate parts, these THERMAL FORMED clamps/magnets (set of 2) are $28.00 plus shipping.
2013 LIFESIZED HOVERBOARDS!!!
Individual parts list (kit parts):
Clamps and Hoverdisks (full set - 2 parts): THERMAL FORMED $28.00
Clamps and Hoverdisks (full set - 2 parts): RESIN CASTINGS $59.95
Battery: $14.95 (resin cast)
Circular footpad (resin cast) $13.95
2 Sideclamps (needed for ALL the boards except marty) $29.95 set of 2
Pitbull Rockets:(set of two SOLID cast HIGH IMPACT plastic injected) $85.00
Pitbull Crossbrace and separation brick: (laser cut ABS for strength) $24
Pitbull Detail set:
Front horn: (laser cut ABS for strength!) $18.95
Y-Panel: $19.95 (add circular footpad for $13.95 extra)
Underside Detail panel (2 parts): $22.95
Hook-on Clamps (6 parts). $12.95
DECALS:
The decals are professionally printed on state of the art equipment. Each decal is DIE-CUT, that is, there is no trimming necessary. Where necessary (especially the odd-man-out deck), they are adhered to translucent wax paper. Spray your deck down with windex, slide your graphic in place (it will slide around for a few minutes), squeegee out any airbubbles and let dry for a few hours.
PITBULL DECAL: $24.95 (one laser cut piece, no trimming necessary)
NO TECH: $69.95 top and bottom no trimming necessary
RISING SUN $69.95 top and bottom
ODD MAN OUT: $69.95 (set of separate decals)
CIRCULAR METALLIC GRAPHICS for hoverpads: 24.95
MARTY DECAL: $74.95 top and bottom, plus side strips, no assembly necessary)
MDF DECKS
You can cut your own decks out of foam, or you can order CNC-cut MDF decks. The decks come to you straight off the CNC machine with flat edges, or you can order them pre-routed with the proper beveled and shaped edges. Prices:
Note:
**To finish the detailing on the PITBULL, you'll need grip surface sheet (made for skateboards), 2" black nylon webbing, and you'll need perferated steel sheets to detail the rocket connections. These materials can be found at any hardware store.
________________________________________________
1:6 Scale Hoverboards.
If the fullscale hoverboards are out of your budget, perhaps you'd love these 1:6 scale hoverboards: The kits are very easy to assemble and paint.
Each kit comes with a resin deck (cast from a laser cut acrylic deck), decal set as needed, and resin cast detail components.
**prices coming soon!! (estimated to be about $19.00 for the no tech, rising sun, odd man out and marty and $25 for the pitbull beause of the various details involved).
Visit all the other HOVERBOARDS AND THE 2015 SODA BOTTLES TOO!!
RISING SUN HOVERBOARD
NO TECH HOVERBOARD
ODD MAN OUT HOVERBOARD
MARTY HOVERBOARD!
PITTBULL HOVERBOARD
1/6 SCALED HOVERBOARDS
COMING SOON!!
EMAIL IMPERVIUM@HOTMAIL.COM